Volunteer Signup - MOWOG 3

[MNbiker]

This thread is to solicit volunteers for MOWOG 3, being held June 1st. Please help us get all positions filled ASAP. For new members - most volunteers will sign up for work positions day of event. This is just for the volunteers required to get the event set up & running.

If your name is already listed, please confirm you will be at the event and able to work.

Thanks!

Dave Bahl, Event Master
Rick Sellner, Assistant Event Master
Randy Williams, Course Designer


************************************************** **

Truck/Trailer transport to site--Phil Ethier

Event Master--Dave Bahl
Assistant Event Master--Rick Sellner

Course Designer--Randy Williams
Course Setup--Steve Garnjobst
Course Setup--John Mensch
Course Setup--David Thompson
Course Setup--Daniil Manaenkov

Grid/Staging Chief--Lee Frisvold
Grid Setup--Josh Karsten

Chief of Safety--Mark Yakich
Chief of Timing--Josh Berman
Driver Education--Phil Ethier
Awards/Trophies--Matt Dahlman

Chief of Registration & Workers--Nikki Dahlman
Registration(treasurer)--Dave Kral
Registration(numbers)--Phil Ethier
Registration--Steve Buetow
Registration--Matt Murphy
Worker Signup--Jody Bedell

Waiver/gate (7:00 AM - 8:30 AM)--Kyle Wheeler
Waiver/gate (7:00 AM - 8:30 AM)--David Vite
Waiver/gate (8:30 AM - 10:00 AM)--Christopher Deutsch

General Setup--Sean Ford
General Setup--Mike Brausen
Timing/PA Setup--Josh Berman & Matt Murphy

Chief Tech Inspector--Steve Meschke
Tech Inspector--Jay McKoskey
Tech Inspector--Peter Nolden
Tech Inspector--Andrew Reiner
Tech Inspector--Larry Sanders

Novice Course walk--Pat Washburn & Phil Ethier

Pack truck/trailer after event--Gretchen Austin
Pack truck/trailer after event--Andres Rodriguez

Truck/Trailer transport after event--Phil Ethier

[MAYcar]

Put me in for chief of safety.

[the tick]

Steve,

Throw me at the course set-up, or tech.

[speedyham]

I'll take a General setup spot.

[G. Jay]

I'd like to try my hand at tech.

Thanks.

[engifineer]

Course setup is my first choice, Tech would be my second choice

[dman]

I'll help with course set-up
Daniil Manaenkov

[Peter]

Tech Inspector

Peter Nolden

[Andrew]

I'd like to try my hand at something other then shagging cones. What would be good for a newbie?

[o2_designs]

I'll take a Waiver Gate from 7-8:30.
Also David Vite normally does this at the same time, so I'm sure he'll be up for doing it as well for same time...

--Kyle

[SmokingTires]

I'm in for General Setup

[sbuetow]

Registration,

Steve Buetow

[MNbiker]

I'd like to try my hand at something other then shagging cones. What would be good for a newbie?
I put you down for tech. Steve and the other workers can show you what to look for.

[914 Dave]

Good for novice walk and instructor stuff.

[murph]

I can do registration.

[RedlineToy]

I will take the last tech spot.

[Matt D.]

I'm available for anything as usual.

[JKarsten]

I will do grid set up.

[njbed]

I'll be there...

[Andrew]

I put you down for tech. Steve and the other workers can show you what to look for.

thanks!

[CDeutsch]

I can do Waiver Gate 8:30 AM - 10:00 AM

Christopher Deutsch

[gsk8r]

I can help pack up after the event.

[washburn]

Steve, you threw this out there just as I left for holiday weekend....didn't see it until now. Looks like I missed out on all the good jobs. I can't stay and pack with the driving time home. Put me down for assistant course, or I can take a second group on course walk, or whatever....thanks!!

[Andres3165]

Put me down to pack trailer after event

Andres

[MNbiker]

Steve, you threw this out there just as I left for holiday weekend....didn't see it until now. Looks like I missed out on all the good jobs. I can't stay and pack with the driving time home. Put me down for assistant course, or I can take a second group on course walk, or whatever....thanks!!
Sorry we didn't plan around your vacation! :p

There's always announcer. ;)

[shane86]

Steve, I'm not registered for M3, and i'm doubting i can make it to help setup alone.

at this point, i'd have to suggest removing me as timing/pa setup.

[the tick]

Sorry we didn't plan around your vacation! :p

There's always announcer. ;)

Yeah, yeah.... What he said!

[phile]

I should be there for Registration.

[SmokingTires]

Steve, I'm not registered for M3, and i'm doubting i can make it to help setup alone.

at this point, i'd have to suggest removing me as timing/pa setup.

Is Josh Berman going to be there?

I have no problem setting the computer system up and getting everything wired, I'm just not versed in running the actual program.

[shane86]

Is Josh Berman going to be there?

I have no problem setting the computer system up and getting everything wired, I'm just not versed in running the actual program. as of right now, i don't know.

But I'm sure there will be some Timing PHDs there that can handle the setup and running

if it comes down to it, the EMs all have my cell info, and can try and call me day of, and i can try and help them work through it.

[murph]

But I'm sure there will be some Timing PHDs there that can handle the setup and running

I'm pretty confident I can do it, just let me know what time you need it running, and give me Shane's cell phone number, just in case. =]

[MNbiker]

as of right now, i don't know.

But I'm sure there will be some Timing PHDs there that can handle the setup and running

if it comes down to it, the EMs all have my cell info, and can try and call me day of, and i can try and help them work through it.

I'll be bringing the updated timing computers with me on Sunday, and should be able to deal with any issues that come up. I'll be doing course setup first thing, but will be available after that to help out as needed.

-Steve

[SmokingTires]

I'm pretty confident I can do it, just let me know what time you need it running, and give me Shane's cell phone number, just in case. =]

And I'll bring your cell phone to call you when your still in bed :lol:

[Dave Kral]

I'll be there for Registration as listed.

[MNbiker]

OK, all the spots are filled. Thanks everyone!

[dman]

When do I have to be there for the course setup?

[MNbiker]

When do I have to be there for the course setup?
7:00 AM